RØNTGENANLÆG

The RAYCON EX1 product inspection system detects all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-rays better than the surrounding product. For example this applies to metal, glass, ceramic, and stone contaminants in food materials. The RAYCON system also detects some types of plastics (e.g. PVC, rubber) as well as other product defects (e.g. trapped air, filling level).

Design & Hygiene:
Saving time for maintenance & cleaning due to:
■ Inclined surfaces, water flows off easily
■ Tool-less accessibility
■ Tool-less removal of curtains in less than 1 minute
■ Tool-less conveyor belt removal within 2 minutes

Evaluation software
The product inspection system is equipped with a high-performance industry-type PC with real-time operating system and sophisticated visualisation software. The system is operated by way of a 10“ – LCD monitor with touch-screen.
X-ray images are evaluated by means of a product-specific visualisation software. Contaminated or defective products are detected and separated.

User Interface
Drag & Drop menus
The operator receives a visual feedback instantly

Menu guide
The operator is guided by the software through necessary steps of product setup or troubleshooting

Easiest and fastest product setup
Autolearn with 5 product samples only -> Startup in less than 2 minutes
Retrain for automatic sensitivity adjustment.
Software increases/decreases sensitivity automatically due to operators command by just marking the x-ray image with fingers -> Saves time consuming adjustments

No special knowledge required

RAYCON H+ W product inspection systems detect all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-radiation to a lesser or greater degree than the surrounding product. For example, metal, glass, ceramics, and stone contaminants in food. 

RAYCON will also detect some plastics (e.g. PVC, rubber) as well as other product defects (e.g. cracks, trapped air). Desired "contaminants" (e.g. aluminium clips on sausage chubs) can be masked out.

Outstanding performance features of the RAYCON H+ W product inspection system:
■ High-power, long-live X-ray tube
■ Minimum maintenance required, system cooling is ensured by way of air-conditioner
■ High-resolution detection unit (contaminants such as stainless steel starting from a size of 0.6 mm can be detected depending on the product)
■ Excellent radiation protection according to the German X-ray ordinance RöV (<1mSv/a); low-wear, hygienic design in stainless steel
■ Reduced costs for maintenance and cleaning due to modular and hygienic design based on current EHEDG guidelines

RAYCON D product inspection systems detect all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-radiation to a lesser or greater degree than the surrounding product. For example, metal, glass, ceramics, and stone contaminants in food. RAYCON D will also detect some plastics (e.g. PVC, rubber) as well as other product defects (e.g. cracks, trapped air). Desired "contaminants" (e.g. aluminium clips on sausage chubs) can be masked out.

Design & Hygiene:

Time reduction for maintenance due to:
■ Sloped surfaces, best possible accessibility, Water flows off easily
■ Shielding covers easily accessible (tool-less) (Gas struts keeping covers at maintenance position, conveyor fully accessible for cleaning)
■ Shielding curtains removable (tool-less) optional wear off layer for reduction of residua caused by to sharp packaging edges
■ Front access panel (tool-less) for cleaning access
■ Conveyor belt exchange within 2 minutes for 1 operator (belt removal towards operator direction, no need for back end access)
■ Conveyor guiding (self guiding, reducing the need for re-adjusting belt)
■ Sliding plates made of stainless-steel, divided into light-weight parts, tool-less removal

X-Ray technology:

■ Long-life x-ray tube with integrated HV-supply, power adjustable per product increasing tube lifetime, air cooling with low maintenance required air conditioner
■ High resolution x-ray detector (foreign bodies at a diameter of 0.6mm detectable)
■ Excellent radiation protection in accordance with statutory X-ray regulations (<1 mSv/a)

RAYCON W product inspection systems detect all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-radiation to a lesser or greater degree than the surrounding product. For example, metal, glass, ceramics, and stone contaminants in food. 

RAYCON will also detect some plastics (e.g. PVC, rubber) as well as other product defects (e.g. cracks, trapped air). Desired "contaminants" (e.g. aluminium clips on sausage chubs) can be masked out.

Outstanding performance features of the RAYCON W product inspection system:

■ High-power, long-live X-ray tube
■ Minimum maintenance required, system cooling is ensured by way of air-conditioner
■ High-resolution detection unit (contaminants such as stainless steel starting from a size of 0.6 mm can be detected depending on the product)
■ Excellent radiation protection according to the German X-ray ordinance RöV (<1mSv/a); low-wear, hygienic design in stainless steel
■ Reduced costs for maintenance and cleaning due to modular and hygienic design

RAYCON BULK product sorting systems detect all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-radiation to greater degree than the surrounding product, for example, metal, glass, ceramics, and stone contaminants in food. RAYCON BULK will also detect some plastics (e.g. PVC, rubber).

The heart of the RAYCON BULK control is a high performance industrial PC incorporating a real-time operating system and sophisticated image processing software featuring user administration, multi-product memory, etc.

Operator input and set up is via a 10“LCD touch screen monitor (IP65).

RAYCON BULK product sorting systems incoreporate the following:
■ High performance long-life X-ray tube with integrated high voltage power supply
■ High resolution detection unit
■ Compact system design and low centre of gravity requiring minimum footprint
■ Excellent radiation protection in accordance with all statutory X-ray regulations (<1 mSv/a)
■ Easy to clean and maintain
■ Flexible rejection and product handling options

The RAYCON 130/240 product inspection system detects all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-rays better than the surrounding product. For example this applies to metal, glass, ceramic, and stone contaminants in food materials. The RAYCON system also detects some types of plastics (e.g. PVC, rubber) as well as other product
defects (e.g. trapped air, filling level).

The RAYCON 130/240 product inspection system is characterised by the following performance features:
■ High-performance, long-life X-ray tube with integrated high-voltage power supply unit
■ Automatic adaptation of the X-ray source position to the desired product height on product change
■ High-resolution detection unit
■ Outstanding radiation protection acc. to German X-ray ordinance (< 1 mSv/a)
■ Guide rails for optimal product guidance
■ Easy-to-clean and easy-to-maintain design
■ No maintenance-intensive radiation protection curtains
■ Can be flexibly combined with various reject systems